Independent guidance. Clear sources. A more informed next step.How we use the data ↗

Career profile · 51-9124

Coating, Painting, and Spraying Machine Setters, Operators, and Tenders

Set up, operate, or tend spraying or rolling machines to coat or paint any of a wide variety of products, including glassware, cloth, ceramics, metal, plastic, paper, or wood, with lacquer, silver, copper, rubber, varnish, glaze, enamel, oil, or rust-proofing materials. Includes painters of transportation vehicles such as painters in auto body repair facilities.

What the work can involve

  • Dispose of hazardous waste in an appropriate manner.
  • Hold or position spray guns to direct spray onto articles.
  • Spray prepared surfaces with specified amounts of primers and decorative or finish coatings.
  • Monitor painting operations to identify flaws, such as blisters or streaks, and correct their causes.
  • Disassemble, clean, and reassemble sprayers or power equipment, using solvents, wire brushes, and cloths.
  • Fill hoppers, reservoirs, troughs, or pans with material used to coat, paint, or spray, using conveyors or pails.

Selected core tasks from O*NET 31.0. Responsibilities vary by employer, specialization and experience.

Preparation and entry routes

O*NET Job Zone 2: Some preparation

This broad O*NET group commonly involves some prior preparation and on-the-job learning. Check the specific employer, occupational credential and state requirements.

Check the route for the specific occupation where you plan to work. Education, employer experience requirements, occupational licensing and industry certification can be separate steps.

Understand the different credentials →

Skills used in this occupation

  • Monitoring
  • Critical Thinking
  • Active Listening
  • Learning Strategies
  • Reading Comprehension

Selected from the highest importance ratings available in O*NET 31.0. These describe the occupation, not a particular school's curriculum.

Knowledge to build

  • Mechanical
  • English Language
  • Production and Processing
  • Education and Training
  • Chemistry

Selected from the highest importance ratings available in O*NET 31.0. These describe the occupation, not a particular school's curriculum.

Common work activities

  • Getting Information
  • Identifying Objects, Actions, and Events
  • Inspecting Equipment, Structures, or Materials
  • Monitoring Processes, Materials, or Surroundings
  • Making Decisions and Solving Problems

Selected from the highest importance ratings available in O*NET 31.0. These describe the occupation, not a particular school's curriculum.

Training subjects to investigate

The federal education-to-occupation crosswalk connects this role to the subjects below. These links do not endorse a school or guarantee that any particular award qualifies a graduate for the job.

Working conditions to consider

These are the most common published responses to selected O*NET work-setting questions. They describe occupation-level survey findings, not every employer or a particular job.

Work-setting questionMost common responseShare giving that response
Contact With OthersContact with others most of the time35.9%08/2022 · sample 37
Exposed to ContaminantsEvery day74.3%08/2022 · sample 37
Exposed to Disease or InfectionsNever77.8%08/2022 · sample 37
Exposed to Hazardous ConditionsEvery day58.2%08/2022 · sample 37
Spend Time SittingNever77.0%08/2022 · sample 36
Spend Time StandingContinually or almost continually69.2%08/2022 · sample 35
Spend Time Using Your Hands to Handle, Control, or Feel Objects, Tools, or ControlsContinually or almost continually87.4%08/2022 · sample 36
Time PressureEvery day67.7%08/2022 · sample 37
Wear Common Protective or Safety Equipment such as Safety Shoes, Glasses, Gloves, Hearing Protection, Hard Hats, or Life JacketsEvery day76.0%08/2022 · sample 37
Work SchedulesRegular (established routine, set schedule)77.3%08/2022 · sample 37

O*NET 31.0 Work Context, selected topics. Only unsuppressed source responses with sample size at least 10 are shown. A most-common response need not be a majority. Sampling uncertainty applies; source dates vary. Ask employers about actual schedules, accessibility, protective equipment and working conditions.

Software used in the workplace

Use these O*NET examples to ask how a course builds practical digital skills. They are workplace examples, not a required shopping list or confirmation of a school’s curriculum.

  • Calendar and scheduling software: Scheduling software
  • Electronic mail software: Microsoft Outlook
  • Facilities management software: Maintenance management software
  • Industrial control software: Robotic painting software
  • Inventory management software: Inventory control software, Inventory management systems
  • Materials requirements planning logistics and supply chain software: Materials requirement planning MRP software
  • Office suite software: Microsoft Office software
  • Spreadsheet software: Microsoft Excel
  • Time accounting software: Time recording software
  • Word processing software: Microsoft Word

Selected categories and examples from O*NET 31.0 Software Skills. Products and employer requirements change. These examples are not endorsements; check the complete official occupation profile.

Physical demands and schedule evidence

BLS surveyed jobs in the broader occupation Coating, painting, and spraying machine setters, operators, and tenders (SOC 51-9124). These preliminary 2025 estimates describe work requirements across surveyed employers. Individual workplaces, adjustments and duties differ.

Explore 52 occupational requirement estimates
RequirementShare of workersStandard error
Workers that had the ability to pause work23.7%11.7 percentage points
Workers that had the ability to telework Estimate is less than 0.5 percent.<0.5%Not published The standard error is not available for this estimate.
Workers that required on-the-job training This estimate is the mode for the category group.84.1%9.6 percentage points
Workers that were not exposed to extreme cold Estimate is greater than 99.5 percent. This estimate is the mode for the category group.>99.5%Not published The standard error is not available for this estimate.
Workers that were exposed to extreme cold, seldom Estimate is less than 0.5 percent.<0.5%Not published The standard error is not available for this estimate.
Workers that were exposed to extreme cold, occasionally Estimate is less than 0.5 percent.<0.5%Not published The standard error is not available for this estimate.
Workers that were exposed to extreme cold, frequently Estimate is less than 0.5 percent.<0.5%Not published The standard error is not available for this estimate.
Workers that were exposed to extreme cold, constantly Estimate is less than 0.5 percent.<0.5%Not published The standard error is not available for this estimate.
Workers that were exposed to extreme cold Estimate is less than 0.5 percent.<0.5%Not published The standard error is not available for this estimate.
Workers that were not exposed to extreme heat This estimate is the mode for the category group.94.3%4.5 percentage points
Workers that were exposed to extreme heat, seldom Estimate is less than 10 percent.<10%Not published The standard error is not available for this estimate.
Workers that were exposed to extreme heat, occasionally Estimate is less than 5 percent.<5%Not published The standard error is not available for this estimate.
Workers that were exposed to extreme heat, frequently Estimate is less than 5 percent.<5%Not published The standard error is not available for this estimate.
Workers that were exposed to extreme heat, constantly Estimate is less than 0.5 percent.<0.5%Not published The standard error is not available for this estimate.
Workers that were exposed to extreme heat5.7%4.5 percentage points
Workers that were exposed to quiet noise Estimate is less than 0.5 percent.<0.5%Not published The standard error is not available for this estimate.
Workers that were exposed to moderate noise This estimate is the mode for the category group.94.8%5.8 percentage points
Workers that were exposed to loud noise Estimate is less than 15 percent.<15%Not published The standard error is not available for this estimate.
Workers that were exposed to very loud noise Estimate is less than 0.5 percent.<0.5%Not published The standard error is not available for this estimate.
Workers that used personal protective equipment to mitigate exposure to noise62.5%14.1 percentage points
Workers that were not exposed to outdoors This estimate is the mode for the category group.86.3%10.8 percentage points
Workers that were exposed to outdoors, seldom Estimate is less than 15 percent.<15%Not published The standard error is not available for this estimate.
Workers that were exposed to outdoors, frequently Estimate is less than 0.5 percent.<0.5%Not published The standard error is not available for this estimate.
Workers that were exposed to outdoors, constantly Estimate is less than 0.5 percent.<0.5%Not published The standard error is not available for this estimate.
Workers that were exposed to outdoors13.7%10.8 percentage points
Workers that were allowed the choice of sitting or standing Estimate is less than 0.5 percent.<0.5%Not published The standard error is not available for this estimate.
Workers that were not allowed the choice of sitting or standing Estimate is greater than 99.5 percent. This estimate is the mode for the category group.>99.5%Not published The standard error is not available for this estimate.
Workers that required climbing ladders, ropes, or scaffolds, seldom12.3%10.1 percentage points
Workers that required climbing ladders, ropes, or scaffolds, occasionally Estimate is less than 0.5 percent.<0.5%Not published The standard error is not available for this estimate.
Workers that required climbing ladders, ropes, or scaffolds, frequently Estimate is less than 0.5 percent.<0.5%Not published The standard error is not available for this estimate.
Workers that required climbing ladders, ropes, or scaffolds, constantly Estimate is less than 0.5 percent.<0.5%Not published The standard error is not available for this estimate.
Workers that required climbing ladders, ropes, or scaffolds12.5%10.0 percentage points
Workers that required driving15.2%6.5 percentage points
Workers that required low postures, seldom20.3%12.0 percentage points
Workers that required low postures, frequently Estimate is less than 15 percent.<15%Not published The standard error is not available for this estimate.
Workers that required low postures, constantly Estimate is less than 0.5 percent.<0.5%Not published The standard error is not available for this estimate.
Workers that required work in low postures82.6%9.8 percentage points
Workers that could choose to crawl when in low postures Estimate is less than 0.5 percent.<0.5%Not published The standard error is not available for this estimate.
Workers that could choose to stoop when in low postures This estimate is the mode for the category group.62.2%14.4 percentage points
Workers that could choose to kneel when in low postures This estimate is the mode for the category group.63.6%13.8 percentage points
Workers that could choose to crouch when in low postures This estimate is the mode for the category group.61.8%14.4 percentage points
Workers that required reaching overhead, occasionally33.4%12.6 percentage points
Workers that required reaching overhead, frequently Estimate is less than 15 percent.<15%Not published The standard error is not available for this estimate.
Workers that required reaching overhead, constantly Estimate is less than 0.5 percent.<0.5%Not published The standard error is not available for this estimate.
Workers that required reaching overhead with one hand Estimate is less than 10 percent.<10%Not published The standard error is not available for this estimate.
Workers that required reaching overhead with both hands Estimate is greater than 75 percent. This estimate is the mode for the category group.>75%Not published The standard error is not available for this estimate.
Workers that required reaching overhead92.1%5.1 percentage points
Workers that required a sedentary strength level Estimate is less than 0.5 percent.<0.5%Not published The standard error is not available for this estimate.
Workers that required a light strength level This estimate is the mode for the category group.65.1%12.9 percentage points
Workers that required a medium strength level26.8%14.6 percentage points
Workers that required a heavy strength level8.0%3.3 percentage points
Workers that required a very heavy strength level Estimate is less than 0.5 percent.<0.5%Not published The standard error is not available for this estimate.

Use this evidence to ask about the actual work environment and available accommodations. It is not a medical assessment or a reason to rule yourself out of an occupation.

BLS Occupational Requirements Survey, preliminary 2025, released January 16, 2026; samples collected August 2023–July 2025. Source bounds such as “less than” are preserved. Categories are not necessarily additive. Understanding standard errors.

Pay & employment outlook

Salary estimates for coating, painting, and spraying machine setters, operators, and tenders

National median annual wage$48,250May 2025 · existing wage and salary workers
National median hourly wage$23.20May 2025 · where BLS publishes hourly pay
Middle 50% of annual wages$40,590–$59,68025th–75th percentile · not an entry-level pay range
Estimated employment158,740May 2025 · excludes self-employed workers

The median divides workers into two equally sized groups by pay. It is not a starting salary, a school’s graduate outcome or a promise of employment. Lower percentiles are not automatically new graduates.

National outlook: 2025–2035

Projected employment change+2.5%164,800 to 168,900 jobs
Projected openings per year15,300Annual average · growth plus replacement needs
Typical education for entry
High school diploma or equivalent
Related work experience
None
Typical on-the-job training
Moderate-term on-the-job training

BLS national employment projections, 2025–2035. Openings include people leaving occupations or the labor force; these are not advertised vacancies. Education categories describe typical entry, not legal eligibility or a guarantee that any specific program is sufficient.

Compare wages across 50 state/DC estimates
May 2025 cross-industry wage estimates for Coating, Painting, and Spraying Machine Setters, Operators, and Tenders
StateAnnual medianHourly medianEmployment
Alabama$44,250$21.275,250
Alaska$69,910$33.61140
Arizona$47,860$23.012,440
Arkansas$46,380$22.301,870
California$52,950$25.4611,570
Colorado$53,590$25.761,470
Connecticut$52,900$25.431,550
Delaware$46,120$22.17100
Florida$47,860$23.016,200
Georgia$46,450$22.335,900
Hawaii$51,990$24.99230
Idaho$45,810$22.03760
Illinois$48,000$23.086,390
Indiana$47,320$22.758,030
Iowa$49,330$23.723,220
Kansas$47,120$22.663,160
Kentucky$47,170$22.682,190
Louisiana$47,950$23.05810
Maine$56,200$27.02680
Maryland$55,510$26.691,010
Massachusetts$51,150$24.592,740
Michigan$44,670$21.487,050
Minnesota$52,210$25.103,430
Mississippi$53,170$25.562,010
Missouri$47,580$22.883,860
Montana$47,380$22.78330
Nebraska$49,340$23.72740
Nevada$45,750$21.99640
New Hampshire$48,410$23.27430
New Jersey$58,240$28.002,890
New Mexico$45,730$21.99400
New York$48,000$23.083,270
North Carolina$46,730$22.475,700
North Dakota$51,020$24.53560
Ohio$48,550$23.348,320
Oklahoma$45,780$22.012,520
Oregon$49,400$23.752,470
Pennsylvania$48,340$23.246,790
Rhode Island$49,850$23.97470
South Carolina$48,220$23.182,780
South Dakota$47,980$23.071,150
Tennessee$47,210$22.703,880
Texas$46,750$22.4816,600
Utah$47,880$23.021,740
Vermont$49,360$23.73170
Virginia$49,880$23.984,130
Washington$59,980$28.843,980
West Virginia$42,950$20.65370
Wisconsin$49,170$23.646,120
Wyoming$50,220$24.14220

Metropolitan and nonmetropolitan wages

Search the 458 published local-area estimates for this occupation. Metropolitan areas can cross state lines; a city’s postal name is not necessarily the statistical area’s name.

Sources: BLS May 2025 OEWS public downloads and 2025–2035 employment projections, retrieved September 9, 2026. Unpublished estimates stay unavailable. “+” means BLS’s upper reporting threshold ($239,200 annually or $115 hourly). Wages exclude self-employment and nonwage benefits. How to interpret these figures.

Compare the route and prepare for work

Questions to test the fit

  1. What does an entry-level working day look like, and how does it differ from the experienced role described here?
  2. Which tasks, work environments and schedules would I enjoy or find difficult?
  3. What education, supervised practice and credentials do local employers actually request?
  4. Can I speak with someone in the occupation or arrange a suitable workplace visit?
  5. How does the complete training cost compare with my realistic budget and available routes?
Use the career-change checklist →

Related occupations to compare

Related through shared training-subject mappings. Entry requirements can differ substantially.

Sources and attribution

This page includes information from the O*NET 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA), used under CC BY 4.0. Trade School Guides selects and organizes the material and adds explanatory guidance. USDOL/ETA has not approved, endorsed or tested these modifications. Occupation code: 51-9124.00.

Training connections: CIP 2020–SOC 2018 crosswalk. Snapshot: September 8, 2026. See the methodology.